FANDOM


BTM II "Poozer"
BTMII 01
Design
Designer Unicide
Role Battle Tank
Specifications
Weight 40 tonnes
Armor 150 / 100 / 100 mm
Primary Armament x1 75mm Short Cannon
Secondary Armament x1 7.62 Ranging machinegun
Powerplant 10.0L Boxer 6 (Petrol)
Top Speed 12 MPH (14 with fuel)
The Battle Tank, Medium II "Poozer" is a multi-role tank developed primarily for short-range combat.

Development Edit

The BTL I was found to simply be too small and lightly-armed for tank combat. A larger, heavier-armed tank was needed. The BTM II's original specs were simply to carry a 75mm gun (one step up from the BTM I's 50mm) and have at least as heavy armor.

Characteristics Edit

The BTM II, on paper, performs acceptably compared to the BTL I. It carries a larger gun and has roughly the same level of mobility. However, in practical testing the BTM II performs abysmally, mainly owing to ergonomic and usability issues with its weapon system.

The fire-control system is essentially unchanged from the BTL I. A machine-gun, firing bullets calibrated to theoretically fly the same as the main gun's shells, is used to test range. When the machine-gun hits the target, the cannon should also.

This worked fine for the BTL I's high-velocity, flat-trajectory 50mm cannon. However, the short cannon employed on the BTM II drops far more dramatically. This, combined with the gunner's limited visibility and the lack of any spotting system for the commander, lead to aiming times of up to thirty seconds in testing conditions and accuracy far below the 50% mark.

These awful results doomed the BTM II to never see combat. This terrible performance also lent it its nickname in part. The tank's front is vaguely reminiscent of that of a Panzer IV and it's a piece of shit, hence "Poozer".

Crew Edit

The BTM II marked the beginning of the multi-crew arrangement now common in the (cool name here maybe?) series.

The BTM II has room for three crew members. A driver (seated in the left front hull) handles manuvering. A gunner, seated in the left side of the turret, handles aiming and firing the main cannon and coaxial machine gun. A commander, seated in a hatch in the right side of the turret, handles situational awareness.

All crew members can swap seats without leaving the tank. In addition, the tank can be operated fine with a single crew-member; additional members just allow each member to focus on one task. This multi-man arrangement does lead to increased space needed to house the crew.

Variants Edit

BTM II Mk2 Edit

An attempt to salvage the II. The BTM III's spotting system was retrofitted to the tank, allowing the commander to spot targets and the gunner to engage relatively quickly. Though this yielded moderately-better results, the tank still underperformed.

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.